Elite 112/6'
MAGAZINE BAR FEEDER
Features & Benefits
Ideally suited to medical and other small, precision parts, the Elite 112 achieves new levels of performance, flexibility and simplicity
The Elite 112 is designed for sliding headstock applications from .028” to .512” (from 0.7 mm to 13 mm), including lathes with extreme spindle speeds up to 25,000 RPM and high headstock acceleration up to 1.5G
Special bar pusher equipped with dual bearing design enables high rotation speeds
Advanced synchronization system enables high acceleration of headstock with 40% less inertia
Walking beam magazine design provides excellent small diameter bar handling without material damage from .028” to .512”
Snap-in Channel Sections - Polyurethane round section guide channels are fully closed and lubricated during operation. If, for any reason, they need to be changed (e.g. damage or long term wear), the entire set can be completely replaced without tools in less than 3 minutes
GENIUS 120/6’
MAGAZINE BAR FEEDER
Features & Benefits
Ideally suited to medical and other small, precision parts, the advanced Genius 120 achieves new levels of performance, flexibility and simplicity6” X 3“ steel beam provides high rigidity, providing a sturdy, vibration-free platformSuperior synchronization technology on sliding headstock machinesEuropean design and quality craftsmanship ensure reliable
OperationAdvanced, full-feature design enables efficient, high-speed production of small diameter barsPatented guide channel is completely closed during the machining cycle for smoother, more efficient operationMagazine designed for rapid selection of bar diameter and quick bar loadingLubrication system optimized by no-filter, no-maintenance centrifugal pump
MINIBOSS 332/338/6’
MAGAZINE BAR FEEDER
Features & Benefits
6” X 3” steel beam provides high rigidity, providing a sturdy, vibration-free platformFast and easy changeover - Complete changeover in less than 20 minutesSuperior synchronization technology on sliding headstock machinesWidest range of bar diameters per guide channel size for less changeover and lower costEuropean design and quality craftsmanship ensure reliable operation, with over 52,000 installations worldwidePatented guide channel is completely closed during the machining cycle for smoother, more efficient operationMagazine designed for rapid selection of bar diameter and quick bar loadingUser-friendly hand-held pendant keypad for easy programmingLubrication system optimized by no-filter, no-maintenance centrifugal pumpAvailable in both front and rear load versions for flexible system configuration
Patented double pusher design dramatically saves floor space.
PRODIGY 552/6’
MAGAZINE BAR FEEDER
Features & Benefits
6” X 3“ steel beam provides high rigidity, providing a sturdy, vibration-free platformFast and easy changeover - Complete changeover in less than 20 minutesSuperior synchronization technology on sliding headstock machinesWidest range of bar diameters per guide channel size for less changeover and lower costEuropean design and quality craftsmanship ensure reliable operation, with over 52,000 installations worldwidePatented guide channel is completely closed during the machining cycle for smoother, more efficient operationMagazine designed for rapid selection of bar diameter and quick bar loadingBar introduction/extraction clamps are self-centering directly on the bar, requiring no adjustment by the operator when changing bar size (except when changing profiled bars)User-friendly hand-held pendant keypad for easy programmingLubrication system optimized by no-filter, no-maintenance centrifugal pumpAvailable in both front and rear load versions for flexible system configurationPatented double pusher design dramatically saves floor space.On-going 24/7 IEMCA technical phone service support
I-FLEX-6
MAGAZINE BAR FEEDER
Features & Benefits
Highlights
• Can operate as a bar feeder or a bar
• Highly rigid structure providing a sturdy vibration free platform
• Flexibility to run a wide range of bar diameters with change of collet and split bushing only
• Versatility – able to run small-medium and medium-high volume production
Features
• The only 6 foot bar feeder in this diameter range that is able to retract
• Bar clamping device used for bar centering/insertion and remnant retract is self-centering and completely adjustment free
• Capable of feeding bars at maximum speed without having to cut bar stock to the length of the lathe spindle.
• This greatly reduces the number of waste remnants and prolongs the life of lathes spindle bearings.
• An extra front bushing gives more accurate bar feeding and drastically reduces the frequency at which the spindle liners need to be replaced
• Axial displacement: 600mm (24”)
• The guides are lubricated and specially designed to with stand the harsh working conditions associated with bar machining. Fully enclosed new quick-change guide channel system for ultra-rapid guide channel replacement.
• Magazine set-up is centralized and only necessary when working with bars of less than 50mm inch diameter
MASTER 865/6’/MP & MASTER 880/6’/MP
MAGAZINE BAR FEEDER
Features & Benefits
Snap-In Channel Sections - The round section guide channels are fully closed and lubricated during operation. If for any reason, they need to be changed (e.g damage or long-term wear), the entire set can be completely replaced without tools in less than 3 minutes. Guide sections are also guaranteed interchangeable with previous
Master series guides.Front Bushing - The urethane front bushing, sized to the bar stock being run, accurately guides the bar between the feeder and the lathe. This intermediate “steady rest” is lubricated, assists in dampening vibration during operation, and opens as the bar pusher nears. The time needed to replace the two half-bushings is less
than 30 seconds and requires no tools.Soft drop bar loading - All individual bars (regardless of diameter) are captured upon release from the material storage tray and mechanically lowered into place.Exceptional Rigidity - The results of precision design, experience and close attention to manufacturing ensures the very highest
levels of torsion and longitudinal rigidity. These elements combine to increase the level of dampening bar vibration during operationAxial Shift Device - The bar feeder is engineered and equipped with, “built-in” axial shifting device (800 mm [31”]). The quick release feature allows working access to the lathe